Gearbox Service Tool Set – Ferrari F1 DCT 7DCL750

Getrag 7DCL750 Transmission Special tool that what you need when you  disassemble and assemble your Transmission professionally. It's a must-have if you're a shop owner or an experienced DIY'er attempting to replace the internal seals on this transmission which are known to fail.

• Extractor cup for 7th gear wheel needle bearing cage Part No. 95978627 (AV 8627);
• Extractor cup for 1st, 2nd and Reverse gear wheel needle bearing cage Part No. 95978628 (AV 8628);
• Punch for extractor cup for 1st, 2nd and Reverse gear wheel needle bearing cage Part No. 95978630 (AV 8630);
• Punch for extractor cup for 7th gear wheel needle bearing cage Part No. 95978816 (AV8816);
• Conical guide tip for installing synchronizer rod in oil seal Part No. 95978817 (AV8817);
• Cone for gear set housing assembly rods Part No. 95978820 (AV 8820);
• Park Lock locking tool Part No. 95978823 (AV 8823);
• Rear cover extractor Part. No. 95978603 (AV 8603)
• Gearbox housing alignment pin Part. No. 95978607 (AV 8607)
• Cap and punch for rear gearbox cover Part. No. 95978613 (AV 8613)
• Tool for tightening bevel gear set ring nut Part. No. 95978619 (AV 8619)
• Reverse shaft height measuring tool Part No. 95978824 (AV 8824).

• Reference numbers: Ferrari 95978627, AV 8627, 95978628, AV 8628, 95978630, AV 8630, 95978816, AV8816, 95978817, AV8817, 95978820, AV 8820, 95978823, AV 8823, 95978603, AV 8603, 95978607, AV 8607, 95978613, AV 8613